Shenzhen Jnicon Technology Co., Ltd.
Professional Waterproof Connectors Manufacturer
|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||High Quality export carton|
|Delivery Time:||3-6 working days|
|Payment Terms:||T/T,Paypal,L/C,Western Union|
|Protection Level:||IP67||Assembly Wire:||Soldering Or Screw Fitting|
|Connection Type:||Push Lock||Contact Pin:||2|
|IP Class:||IP67 (1m / 30min)||Seal Material:||Silicone|
industrial circular connector,
industrial circular connector
M25 waterproof Circular connector is the perfect solution to make your own waterproof connection cables easily. Thanks to its screw based terminal, soldering is not required and installation just takes a few minutes.
|Voltage Rating||600VAC max|
|Current Rating||50A max|
|Min Wire Size OD||6.5mm ~ 10mm|
|Max Wire Size OD||10.5mm ~ 18mm|
|Max.Cable Cross Section Area||0.5mm2 ~ 6.0mm2|
|Contact Resistance||10 mΩ max|
|Insulation Structure||500 MΩ at 500VDC|
|Operating Temperature||-40°C ~ +105°C|
|IP Class||IP67 (1m / 30min)|
|Contact/Terminal Material||Gold Plated Brass|
Once assembled, the M25 Outdoor Waterproof Circular Conector is easy to plug and play while keeping the elements and water out of splices and junctions. To disconnect, just unscrew the main body and pull apart the two ends.The M25 Waterproof conector has multiple waterproofing levels, consisting of o-rings, waterproof sealant, and flexible end seals designed to tighten and close awhen screwed together.
This M25 circular power connector has a waterproof rating of IP67. To assemble the M25 Outdoor Waterproof Connector,only a Philips Screwdriver is required to attach the two wires inside each main body. Once each side is connected, the wiring is fully protected from the elements.If soldering version needed, its also avialble.
Contact Person: Carly